Titan – Configuration: LAN

The “LAN” configuration section refers to the Ethernet configuration.

LAN: Basic Settings

This section allows we to configure the basic network parameters for an Ethernet connection.

  • Static IP: a static IP address will be assigned
  • IP address: a local IP address of the Ethernet interface (by default 192.168.1.2)
  • IP subnet mask: subnet mask
  • DNS1: main DNS server
  • DNS2: secondary DNS server
  • IP gateway: leave blank if we want to use 2G/3G networks. Useful to provide Internet connectivity to WiFi devices redirecting the output towards an ADSL router IP address instead of via 2G/3G.

ADDITIONAL NOTES

  • Once the configuration is finished, click “SAVE CONFIG” to save the changes. Remember that the router should be restarted for the changes to take effect.

LAN: DHCP Server

This section shows we how to enable and configure the DHCP server assigned to the router’s Ethernet interface.

  • Enabled: if activated, the DHCP server of the Ethernet interface is activated
  • Starting IP Address: indicates the first IP address that the DHCP server will assign
  • Ending IP Address: indicates the last IP address that the DHCP server will assign
  • MAC Address/IP Address: these two parameters allows the DHCP server to assign the same IP address to a specific MAC address

Titan User Manual - LAN DHCP Server

ADDITIONAL NOTES

  • Once the configuration is finished, click “SAVE CONFIG” to save the changes. Click “SAVE RULE” for each MAC/IP pairing that we wish to create. Up to 10 can be created.
  • Remember that the router should be restarted for the changes to take effect.